NXP MIMXRT685-EVK

From SEGGER Wiki
Jump to: navigation, search

J-Link OB

The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board that can be reprogrammed via NXP LPCScrypt to a J-Link OB.

In order to make sure that the J-Link OB can properly access the i.MXRT685 MCU on the board, the following jumper conditions must be met:

  • JP17 closed
  • JP18 closed
  • JP19 closed

External J-Link

The NXP MIMXRT685-EVK comes with an LPC-Link2-on-board which acts as a J-Link OB.

In order to make sure that an external J-Link connected to J19 (debug header) can properly access the i.MXRT685 MCU on the board, the following jumper conditions must be met:

  • JP17 open
  • JP18 open
  • JP19 open
Retrieved from "https://wiki.segger.com/index.php?title=NXP_MIMXRT685-EVK&oldid=11944"