ST STM32MP13

From SEGGER Wiki
Jump to: navigation, search

The ST STM32MP13 series devices are Cortex-A7 single core based devices. It is a sub family of the STM32MP1.

Flash

The ST STM32MP13 are devices without internal flash. They come with QSPI flash support.

(QSPI) flash programming on the STM32MP13 devices is currently not supported by J-Link.

Reset strategy

For the the STM32MP13xx, a device specific reset was implemented. On a reset via J-Link, the device is reset via system reset, by writing the corresponding value to the RCC_MP_GRSTCSETR register. Afterwards the J-Link halts the device as soon as possible.

For further information please refer to J-Link Reset Strategies.

Evaluation Boards

Currently, there is no evaluation board available that comes with an external debug header that can be used to connect an external Probe (e.g. J-Link) to it.