Silicon Labs RS9116X-SB-EVK1

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the Silicon Labs RS9116X-SB-EVK1 evaluation board. It can be used to test & verify Silicon Labs RS9116 support.

SiLabs RS9116X SB EVK1.jpg

Minimum requirements

  • J-Link software V6.95b or later

Preparing for J-Link

  • Connect the J-Link to the JTAG/TRACE header (J7)
  • Power the board via external USB power supply (J23)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

JLink Con RS9116X SB EVK1.JPG