Difference between revisions of "GigaDevice GD32L233C-START"
(Created page with "Category:Evalboards __TOC__ This article describes specifics for the GigaDevice GD32L233C-START evaluation board.<br> File:GigaDevice_GD32L233C-START_GD32L233CCT6_pictu...") |
(→Preparing for J-Link) |
||
Line 11: | Line 11: | ||
! J-Link Pin || Connector !! Pin || Name |
! J-Link Pin || Connector !! Pin || Name |
||
|- |
|- |
||
− | | VTref || |
+ | | VTref || JP2 || 1 || +3V3 |
|- |
|- |
||
− | | GND || |
+ | | GND || JP2 || 4 || GND |
|- |
|- |
||
− | | TMS/SWDIO || |
+ | | TMS/SWDIO || JP2 || 2 || PA13 |
|- |
|- |
||
− | | TCK/SWCLK || |
+ | | TCK/SWCLK || JP2 || 3 || PA14 |
|} |
|} |
||
− | *Power the board via |
+ | *Power the board via CN100. |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
[[File:GigaDevice_GD32L233C-START_GD32L233CCT6_connect.png|400px]] |
[[File:GigaDevice_GD32L233C-START_GD32L233CCT6_connect.png|400px]] |
Revision as of 16:12, 7 June 2024
This article describes specifics for the GigaDevice GD32L233C-START evaluation board.
Preparing for J-Link
- Connect the J-Link to this pins:
J-Link Pin | Connector | Pin | Name |
---|---|---|---|
VTref | JP2 | 1 | +3V3 |
GND | JP2 | 4 | GND |
TMS/SWDIO | JP2 | 2 | PA13 |
TCK/SWCLK | JP2 | 3 | PA14 |
- Power the board via CN100.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32L233C-START.
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V8.10b
- Hardware: GigaDevice GD32L233C-START
- Link: File:GigaDevice GD32L233CCT6 TestProject ES V810b.zip