Difference between revisions of "4-Pin Trace with LPC4357"

From SEGGER Wiki
Jump to: navigation, search
Line 32: Line 32:
 
* Set Trace Port to "Sync Trace Port with 4-bit Data".
 
* Set Trace Port to "Sync Trace Port with 4-bit Data".
 
* Start the debugging session and open an "Instruction Trace" window.
 
* Start the debugging session and open an "Instruction Trace" window.
  +
  +
== Sample project files ==
  +
  +
[[File:LPC4357.zip]]

Revision as of 14:53, 15 January 2016

Configure required pins for trace output

1. Create a file for the device

LPC4357.ini

/*********************************************************************
* Configure pins to enable the trace port                            *
*********************************************************************/

_WDWORD(0x40086790, 0x00000032); // Configure PF_4 AS FUNC2
_WDWORD(0x40086794, 0x00000033); // Configure PF_5 as FUNC3
_WDWORD(0x40086798, 0x00000033); // Configure PF_6 as FUNC3
_WDWORD(0x4008679C, 0x00000033); // Configure PF_7 as FUNC3
_WDWORD(0x400867A0, 0x00000033); // Configure PF_8 as FUNC3

2. Set the file as initialization file

  • Open the dialog "Options for Target - Debug".

wiki-trace-initfile-LPC4357.png

  • Set the created file as Initialization File.

Configure µVision for ETM trace

  • Click Settings to open the "Target Driver Setup" dialog.
  • Click the Trace tab.

wiki-trace-settings.png

  • Set Enable and ETM Trace Enable.
  • Set Trace Port to "Sync Trace Port with 4-bit Data".
  • Start the debugging session and open an "Instruction Trace" window.

Sample project files

File:LPC4357.zip