4-Pin Trace with LPC4357

Configure required pins for trace output

1. Create a file for the device

/*-------------------------------------------------------------------
** Define the function to enable the trace port
**-----------------------------------------------------------------*/
FUNC void EnableTPIU(void) {
  _WDWORD(0x40086790, 0x00000032); // Configure PF_4 AS FUNC2
  _WDWORD(0x40086794, 0x00000033); // Configure PF_5 as FUNC3
  _WDWORD(0x40086798, 0x00000033); // Configure PF_6 as FUNC3
  _WDWORD(0x4008679C, 0x00000033); // Configure PF_7 as FUNC3
  _WDWORD(0x400867A0, 0x00000033); // Configure PF_8 as FUNC3
}

/*-------------------------------------------------------------------
** Invoke the function at debugger startup
**-----------------------------------------------------------------*/
EnableTPIU();

2. Set the file as initialization file

• Open the dialog "Options for Target - Debug".

• Set the created file as Initialization File.

Configure µVision for ETM trace

• Click Settings to open the "Target Driver Setup" dialog.
• Click the Trace tab.

• Set Enable and ETM Trace Enable.
• Set Trace Port to "Sync Trace Port with 4-bit Data".
• Start the debugging session and open an "Instruction Trace" window.