Adjusting trace timings and general troubleshooting

From SEGGER Wiki
Revision as of 15:47, 22 September 2022 by Nino (talk | contribs) (Created page with "This article will explain how the trace sample timing of the J-Trace Pro can be adjusted and some general troubleshooting steps if a setup does not work out-of-the-box as it w...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article will explain how the trace sample timing of the J-Trace Pro can be adjusted and some general troubleshooting steps if a setup does not work out-of-the-box as it would be typically expected.

Trace Timing Configuration

Common trace timings

Trace signal quality

The good

The bad

The ugly

FAQ