Analog ADuCM355

From SEGGER Wiki
Jump to: navigation, search

Analogs Devices ADuCM355 is an ARM Cortex-M3 based MCU which controls and measures electrochemical sensors and biosensors. The device features current, voltage, and impedance measurement capability.

Internal Flash

Supported Regions

  • Internal flash (0x00000000 - 0x0001FFFF)

NOTE: Right now, the J-Link software assumes the flash as one sector because it seems that erase chip is the one and only reliable solution in order to perform a erase and to make sure that following flash operations (e.g. program are working as expected).

Reset

The device has a ROM code which needs to be run after reset. The J-Link halts the MCU after executing the ROM code but before starting the application.

Evaluation Boards

TBD

Example Application

TBD