Difference between revisions of "Apollo4"

From SEGGER Wiki
Jump to: navigation, search
(Created page with "__TOC__ The AmbiqMicro Apollo4 are ultra-low power, Cortex-M4 based. ==Internal Flash== ===Supported Regions=== The internal flash is divided into 2 different regions:<br> *Re...")
 
Line 10: Line 10:
 
*Ambiq Micro Apollo4 blue evaluation board: https://wiki.segger.com/AmbiqMicro_Apollo4Blue
 
*Ambiq Micro Apollo4 blue evaluation board: https://wiki.segger.com/AmbiqMicro_Apollo4Blue
   
==Example Application==
+
==Example Project==
  +
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP JN5189-DK006. It is a simple Hello World sample linked into the internal flash.
*Ambiq Micro Apollo4 blue evaluation board: https://wiki.segger.com/AmbiqMicro_Apollo4#Example_Project
 
  +
'''SETUP'''
  +
*J-Link software: V6.95c
  +
*Embedded Studio: V5.34
  +
*Hardware: Ambiq Micro Apollo4 Blue (AMA4B2EVB)
  +
*Link: [[File:AmbiqMicro_Apollo4_TestProject_ES_V534.zip]]

Revision as of 11:46, 2 February 2021

The AmbiqMicro Apollo4 are ultra-low power, Cortex-M4 based.

Internal Flash

Supported Regions

The internal flash is divided into 2 different regions:

  • Reserved by boot code (0x00000 - 0x17FFF), not accesible.
  • Program Flash (0x18000 - 0x1FFFFFF)

The J-Link supports the program flash space.

Evaluation Boards

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the NXP JN5189-DK006. It is a simple Hello World sample linked into the internal flash. SETUP