Flasher ARM V3
This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER Flasher ARM V3.
Note:
The Flasher ARM V3 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER.
Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.
Contents
Hardware and Software Features
| Hardware version | 3 | |
|---|---|---|
| Operating mode** | S | PC |
| Operating Mode** S = Standalone; PC = PC-based | ||
| Hardware Features | ||
| USB 2.0 Full Speed |  |
|
| Ethernet | |
|
| JTAG interface | |
|
| cJTAG interface |  |
|
| SWD interface | |
|
| SWO interface | |
|
| SPI interface | |
|
| QSPI interface | |
|
| Microchip PIC32 ICSP interface | |
|
| Renesas FINE interface | |
|
| SiLabs C2 2-wire interface | |
|
| ETB Trace ARM7/9 | |
|
| ETB Trace Cortex-M | |
|
| ETB Trace Cortex-A/R | |
|
| ETM Trace Cortex-M | |
|
| ETM Trace Cortex-A | |
|
| VCOM | |
|
| Memory Stop mode support | |
|
| Cortex-M Monitor Mode debugging | |
|
| SWD Multi-Drop | |
|
| CMSIS-DAP mode | |
|
| ARM legacy Cores | ||
| ARM7 | |
|
| ARM9 | |
|
| ARM11 | |
|
| ARM Cortex Cores | ||
| Cortex-A5 | |
|
| Cortex-A7 | |
|
| Cortex-A8 | |
|
| Cortex-A9 | |
|
| Cortex-A12 | |
|
| Cortex-A15 | |
|
| Cortex-A17 | |
|
| Cortex-A53 | |
|
| Cortex-A57 | |
|
| Cortex-A72 | |
|
| Cortex-M0 | |
|
| Cortex-M0+ | |
|
| Cortex-M1 | |
|
| Cortex-M3 | |
|
| Cortex-M4 | |
|
| Cortex-M7 | |
|
| Cortex-M23 | |
|
| Cortex-M33 | |
|
| Cortex-R4 | |
|
| Cortex-R5 | |
|
| Cortex-R8 | |
|
| SC000 (M0 secure) | |
|
| SC300 (M3 secure) | |
|
| RISC-V | ||
| RV32 | |
|
| RV64 | |
|
| Microchip PIC32 | ||
| PIC32MX | |
|
| PIC32MZ | |
|
| SiLabs 8051 | ||
| EFM8 | |
|
| Renesas RX | ||
| RX110 | |
|
| RX111 | |
|
| RX210 | |
|
| RX21A | |
|
| RX220 | |
|
| RX610 | |
|
| RX621 | |
|
| RX62G | |
|
| RX62N | |
|
| RX62T | |
|
| RX630 | |
|
| RX631 | |
|
| RX63N | |
|
| RX63T | |
|
| RX64M | |
|
