GigaDevice GD32VW553H-EVAL

From SEGGER Wiki
Revision as of 14:28, 15 May 2024 by Simon Buchholz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This article describes specifics for the GigaDevice GD32VW553H-EVAL evaluation board.
GigaDevice-GD32VW553H-EVAL GD32VW553H board.jpg

Preparing for J-Link

  • Connect the J-Link to JP1.
  • Power the board via CN2.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

GigaDevice-GD32VW553H-EVAL GD32VW553H connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32VW553H-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP