Difference between revisions of "Hilscher netX90"
(→On-Chip Memory Regions) |
|||
| Line 1: | Line 1: | ||
__TOC__ |
__TOC__ |
||
| − | The netX90 is the newest addition to Hilscher’s SoC family that provides a superior solution with an unmatched protocol flexibility for a variety of industrial slave or device applications in the process and factory automation |
+ | The netX90 is the newest addition to Hilscher’s SoC family that provides a superior solution with an unmatched protocol flexibility for a variety of industrial slave or device applications in the process and factory automation. |
==Debug Support== |
==Debug Support== |
||
Revision as of 10:10, 26 August 2022
The netX90 is the newest addition to Hilscher’s SoC family that provides a superior solution with an unmatched protocol flexibility for a variety of industrial slave or device applications in the process and factory automation.
Debug Support
The J-Link support for the Hilscher netX90 includes both Cortex-M4 cores, Net-Core and App-Core
On-Chip Memory Regions
The internal flash is divided into 3 different regions for the Net-Core:
| Instance Name | Size (kilo bytes) | Memory region |
|---|---|---|
| Bank 0 | 512 | 0x00100000 - 0x0017FFFF |
| Bank 1 | 512 | 0x00180000 - 0x001FFFFF |
| Bank 2 | 512 | 0x00200000 - 0x0027FFFF |
The App-Core has only access to internal flash bank 2:
| Instance Name | Size (kilo bytes) | Memory region |
|---|---|---|
| Bank 2 | 512 | 0x00200000 - 0x0027FFFF |
Trace Support
- Hilscher netX90 tracing: https://wiki.segger.com/Tracing_on_Hilscher_netX90
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Hilscher NetX90 evalboard. It is a simple Hello World sample linked into the internal flash. SETUP
- J-Link software: V7.55d
- Embedded Studio: V5.50d
- Hardware: Hilscher NXHX 90-JTAG evalboard (silicon revision 1916)
- Link: File:Hilscher NetX90 ComCore TestProject ES V550d.zip
- Link: File:Hilscher NetX90 AppCore TestProject ES V550d.zip
Note: The App core example works only, when the App Core has been enabled by the Com core.
