i.MX6SoloX

From SEGGER Wiki
(Redirected from I.MX6SoloX)
Jump to: navigation, search

The NXP iMX6SoloX are multi-core MCUs composed of a Cortex-M4 and Cortex-A9 core.

Flash Banks

QSPI Flash

QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the QSPI Flash Programming Support article.
J-Link supports the following pin configurations for iMX6SoloX:

Alternate function Port / Pin
QSPI2A_SS0_B IOMUXC_SW_MUX_CTL_PAD_NAND_ALE
QSPI2A_DATA2 IOMUXC_SW_MUX_CTL_PAD_NAND_CE0_B
QSPI2A_DATA3 IOMUXC_SW_MUX_CTL_PAD_NAND_CE1_B
QSPI2A_SCLK IOMUXC_SW_MUX_CTL_PAD_NAND_CLE
QSPI2A_DATA1 IOMUXC_SW_MUX_CTL_PAD_NAND_READY_B
QSPI2A_DATA0 IOMUXC_SW_MUX_CTL_PAD_NAND_WP_B

Multi-Core Support

Before proceeding with this article, please check out the generic article regarding Multi-Core debugging here.
The iMX6SoloX family feature a Cortex-A9 and Cortex-M4 core.
In below, the debug related multi-core behavior of the J-Link is described for each core:

Cortex-A9

Init/Setup

  • Enables debugging

Reset

  • No Reset is performed.

Secondary core(s)

Init/Setup

  • Enables debugging

Reset

  • No reset is performed.

Evaluation Boards

Example Application