Difference between revisions of "IMX6UL-EVK"
(Created page with "In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered: R1407, R1431-1434, and the following res...") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | ==Enable debugging via JTAG== |
||
In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered: |
In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered: |
||
| − | R1407 |
+ | *R1407 |
| + | *R1431-1434 |
||
and the following resistors need to be assembled: |
and the following resistors need to be assembled: |
||
| − | R1912-14 |
+ | *R1912-14 |
| + | *R1916 |
||
Latest revision as of 09:45, 10 February 2017
Enable debugging via JTAG
In order to use the enable to pins of the JTAG connector of the IMX6UL-EVK eval board, the following resistors need to be desoldered:
- R1407
- R1431-1434
and the following resistors need to be assembled:
- R1912-14
- R1916
