IMX6ULL-EVK

From SEGGER Wiki
Revision as of 12:07, 14 September 2017 by Nino (talk | contribs)
Jump to: navigation, search

Enable debugging via JTAG

In order to use the enable to pins of the JTAG connector of the IMX6ULL-EVK eval board, the following resistors need to be desoldered:

  • R1407
  • R1431-1434

Note: This changes are only valid for revision one boards. You can recognize them by flipping the board around and the two stickers on the back must read this:

700-28616 REV A1

SCH-28616 REV C1