Infineon PMG1 S2

From SEGGER Wiki
Jump to: navigation, search

EZ-PD PMG1 is a family of high-voltage USB PD MCUs with Arm® Cortex®-M0/Cortex-M0+ CPU. The PMG1 family of controllers includes different MCUs with integrated USB PD controller, analog, and digital peripherals. You can choose the controller based on the design requirement. PMG1 is targeted at embedded systems that provide or consume power to or from a high-voltage USB-C PD port and leverage the MCU to provide additional control capability.

Flash memory layout

The PMG1-S2 / CYPM1211 series devices have 128KB internal flash. The flashes consists of one big sector.

Flash Start address End address Sector size Sector count Total size
internal flash 0x00000000 0x0001FFFF 128 KB 1 128 KB

Connection behavior

The connect sequence of PMG1-S2 devices is very time critical and is performed from the J-Link's side directly.

A PMG1-S2 device with reconfigured SWD pins runs automatically the acquire sequence to get control of the SWD pins for debugging back.