Infineon S25Hx256T / S25Hx512T / S25Hx01GT serial flash

From SEGGER Wiki
Revision as of 13:45, 30 April 2020 by Sebastian (talk | contribs) (Created page with "J-Flash SPI supports only SPI Flashes with uniform sector sizes. By default the Cypress S25Hx256T/512T/01GT have a hybrid sector architecture. Therefore you need to set the co...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

J-Flash SPI supports only SPI Flashes with uniform sector sizes. By default the Cypress S25Hx256T/512T/01GT have a hybrid sector architecture. Therefore you need to set the configuration bit 3 UNHYSA within CFR3x register.

Reconfigure Cypress S25Hx256T / S25Hx512T / S25Hx01GT serial flash to 64kByte sector size

The following initsteps show how to reconfigure the serial flash to the supported 64kByte sector size within J-Flash SPI.

File:InitStepsJFlashSPI ReconfigureCypressSectorSize.png

Retrieved from "https://wiki.segger.com/index.php?title=Infineon_S25Hx256T_/_S25Hx512T_/_S25Hx01GT_serial_flash&oldid=7614"