https://wiki.segger.com/index.php?title=J-Flash_SPI&feed=atom&action=history
J-Flash SPI - Revision history
2024-03-28T12:54:39Z
Revision history for this page on the wiki
MediaWiki 1.31.16
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=14279&oldid=prev
JanB: /* Command Line Interface */
2023-02-27T08:32:25Z
<p><span dir="auto"><span class="autocomment">Command Line Interface</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 08:32, 27 February 2023</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 371:</td>
<td colspan="2" class="diff-lineno">Line 371:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some options accept additional parameters which are enclosed in angle brackets, e.g. <FILENAME>.</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some options accept additional parameters which are enclosed in angle brackets, e.g. <FILENAME>.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If these parameters are optional they are enclosed in square brackets too, e.g. [<SADDR>].</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If these parameters are optional they are enclosed in square brackets too, e.g. [<SADDR>].</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Neither the angel nor the square brackets must be typed on the command line, they are used here only to denote (optional) parameters.</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Neither the angel nor the square brackets must be typed on the command line, they are used here only to denote (optional) parameters.<ins class="diffchange diffchange-inline"><br></ins></div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Also, note that a parameter must follow immediately after the option,</div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>e.g. <tt>JFlashSPI.exe -openprjC:\Projects\Default.jflash</tt>.<br></div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The command line options are evaluated in the order they are passed to J-Flash, so please ensure that a project and data file has already been opened when</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The command line options are evaluated in the order they are passed to J-Flash, so please ensure that a project and data file has already been opened when</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>evaluating a command line option which requires this.<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>evaluating a command line option which requires this.<br></div></td>
</tr>
</table>
JanB
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=14102&oldid=prev
Alex: /* How to configure quad mode */
2023-02-07T16:18:55Z
<p><span dir="auto"><span class="autocomment">How to configure quad mode</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 16:18, 7 February 2023</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 741:</td>
<td colspan="2" class="diff-lineno">Line 741:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== How to configure quad mode ==</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== How to configure quad mode ==</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>{{Note|1=</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* Not all J-Link / Flasher / ... models support the QSPI interface (4 data lines), but some only support traditional SPI. For an overview about which model and hardware version support QSPI, please refer to the [[J-Link_Model_Overview | model overview wiki article]]</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>}}</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In order to configure or setup quad mode in J-Flash SPI, some flash chip-specific information needs to be gathered.</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In order to configure or setup quad mode in J-Flash SPI, some flash chip-specific information needs to be gathered.</div></td>
</tr>
</table>
Alex
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=13173&oldid=prev
Leon: /* Init and Exit steps */
2022-10-13T14:52:09Z
<p><span dir="auto"><span class="autocomment">Init and Exit steps</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:52, 13 October 2022</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 260:</td>
<td colspan="2" class="diff-lineno">Line 260:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:JFlashSPI_ProjectSettings_InitSteps.PNG | thumb | right | 400px | J-Flash SPI Project settings dialog - Setup - Init steps]]</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:JFlashSPI_ProjectSettings_InitSteps.PNG | thumb | right | 400px | J-Flash SPI Project settings dialog - Setup - Init steps]]</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Can be used to add custom command sequences like for example write protection register.</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Can be used to add custom command sequences like for example write protection register.</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>For further information regarding this, please refer to [[#Custom Command Sequences]].</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For further information regarding this, please refer to [[#Custom Command Sequences<ins class="diffchange diffchange-inline"> | custom command sequences</ins>]].</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><br clear=all></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><br clear=all></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
</table>
Leon
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=13086&oldid=prev
JanB: /* Help menu elements */
2022-10-05T14:49:13Z
<p><span dir="auto"><span class="autocomment">Help menu elements</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:49, 5 October 2022</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 194:</td>
<td colspan="2" class="diff-lineno">Line 194:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">=</del>=== Help menu elements <del class="diffchange diffchange-inline">=</del>===</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>=== Help menu elements ===</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{| class="wikitable"</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{| class="wikitable"</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>! Command !! Description</div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>! Command !! Description</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>| J-Link User Guide || Opens the [[UM08001 J-Link / J-Trace User Guide]] wiki page.</div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| J-Flash SPI Wiki || Opens the J-Flash SPI wiki in a browser.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| J-Link Wiki || Opens the J-Link wiki in a browser.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| Flasher Wiki || Opens the Flasher wiki in a browser.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| J-Flash User Guide || Opens the J-Flash Manual (UM08003) document in the default .PDF application of the system.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| J-Link User Guide || Opens the J-Link Manual (UM08001) in the default .PDF application of the system.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| Flasher User Guide || Opens the Flasher Manual (UM08022) in the default .PDF application of the system.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| Flasher ATE User Guide || Opens the Flasher ATE Manual (UM08035) in the default .PDF application of the system.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| Flasher Hub User Guide || Opens the Flasher Hub Manual (UM08039) in the default .PDF application of the system.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| Licenses... || Shows a dialog with licensing information. The serial number of a connected J-Link may be read and licenses added or removed.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>| About... || J-Flash and company information.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|-</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>| About... || J-Flash SPI and company information.</div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
</table>
JanB
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=10106&oldid=prev
Fabian at 07:12, 27 May 2021
2021-05-27T07:12:55Z
<p></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 07:12, 27 May 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 796:</td>
<td colspan="2" class="diff-lineno">Line 796:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== SPI flashes with multiple erase commands ===</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== SPI flashes with multiple erase commands ===</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some SPI flashes support multiple erase commands that allow to erase different units on the flash.</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some SPI flashes support multiple erase commands that allow to erase different units on the flash.</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>For example some flashes provide a <tt>sector erase</tt> (erase 4 <del class="diffchange diffchange-inline">KB</del> units) and a <tt>block erase</tt> (erase 16 <del class="diffchange diffchange-inline">KB</del> or 64 <del class="diffchange diffchange-inline">KB</del> units) command.</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For example some flashes provide a <tt>sector erase</tt> (erase 4 <ins class="diffchange diffchange-inline">KiB</ins> units) and a <tt>block erase</tt> (erase 16 <ins class="diffchange diffchange-inline">KiB</ins> or 64 <ins class="diffchange diffchange-inline">KiB</ins> units) command.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In general, it is up to the user which command to use, as the <tt>EraseSector</tt> command can be overridden by the user.</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In general, it is up to the user which command to use, as the <tt>EraseSector</tt> command can be overridden by the user.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When manually changing the <tt>SectorErase</tt> command in the '''Options''' -> '''Project settings...''' -> '''Flash''' tab,</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When manually changing the <tt>SectorErase</tt> command in the '''Options''' -> '''Project settings...''' -> '''Flash''' tab,</div></td>
</tr>
<tr>
<td colspan="2" class="diff-lineno">Line 812:</td>
<td colspan="2" class="diff-lineno">Line 812:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In direct programming mode (J-Link directly connects to the pins of the SPI flash), the programming speed is mainly limited by the SPI communication speed,</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In direct programming mode (J-Link directly connects to the pins of the SPI flash), the programming speed is mainly limited by the SPI communication speed,</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the USB speed of J-Link (if a Full-Speed or Hi-Speed based J-Link is used) and the maximum programming speed of the flash itself.<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>the USB speed of J-Link (if a Full-Speed or Hi-Speed based J-Link is used) and the maximum programming speed of the flash itself.<br></div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>For most SPI flash devices, in direct programming mode speeds of >= 50 <del class="diffchange diffchange-inline">KB</del>/s can be achieved.</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For most SPI flash devices, in direct programming mode speeds of >= 50 <ins class="diffchange diffchange-inline">KiB</ins>/s can be achieved.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Background information ==</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Background information ==</div></td>
</tr>
</table>
Fabian
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=9715&oldid=prev
Leon: /* Quad mode initialization */
2021-02-15T13:47:12Z
<p><span dir="auto"><span class="autocomment">Quad mode initialization</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 13:47, 15 February 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 740:</td>
<td colspan="2" class="diff-lineno">Line 740:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Most flash chips need to be put into a "quad mode" or similar before data can be written or read in quad mode.<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Most flash chips need to be put into a "quad mode" or similar before data can be written or read in quad mode.<br></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In J-Flash SPI, the procedure which enables this mode is referred to as "Quad Mode Enable Sequence".<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In J-Flash SPI, the procedure which enables this mode is referred to as "Quad Mode Enable Sequence".<br></div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>In a J-Flash SPI project, this sequence can be configured similar to the init/exit steps<del class="diffchange diffchange-inline">. An example for a Quad Mode Enable Sequence can be found in the screenshot pictured on the right.<br></del></div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In a J-Flash SPI project, this sequence can be configured similar to the init/exit steps<ins class="diffchange diffchange-inline">,</ins></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>by defining a series of custom steps inside the "''Quad Mode Enable Sequence''" table in the "''Flash''" tab of the J-Flash project settings.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>An example for a Quad Mode Enable Sequence can be found in the screenshot pictured on the right.<br></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The pictured sequence enables quad mode for a Spansion S25FL512S flash chip by doing the following:</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The pictured sequence enables quad mode for a Spansion S25FL512S flash chip by doing the following:</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Read the configuration register (RDCR command) and store it in a temporary buffer on the host</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Read the configuration register (RDCR command) and store it in a temporary buffer on the host</div></td>
</tr>
</table>
Leon
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=9714&oldid=prev
Leon: /* How to configure quad mode */
2021-02-15T13:45:12Z
<p><span dir="auto"><span class="autocomment">How to configure quad mode</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 13:45, 15 February 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 754:</td>
<td colspan="2" class="diff-lineno">Line 754:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some flash chips also support a mode called "Quad I/O" mode or similar. This mode makes the flash chip assume that '''any''' SPI communication happens in quad mode,</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some flash chips also support a mode called "Quad I/O" mode or similar. This mode makes the flash chip assume that '''any''' SPI communication happens in quad mode,</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>meaning that sending any command (not just page program or read data) happens in quad mode.<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>meaning that sending any command (not just page program or read data) happens in quad mode.<br></div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">This</del> type of "Quad I/O" mode is '''not''' supported. Make sure that this mode is not accidentally enabled.</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Currently, this</ins> type of "Quad I/O" mode is '''not''' supported<ins class="diffchange diffchange-inline"> by J-Flash SPI and Flasher</ins>. Make sure that this mode is not accidentally enabled.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><br clear=all></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><br clear=all></div></td>
</tr>
</table>
Leon
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=9713&oldid=prev
Leon: /* Quad mode initialization */
2021-02-15T13:44:21Z
<p><span dir="auto"><span class="autocomment">Quad mode initialization</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 13:44, 15 February 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 750:</td>
<td colspan="2" class="diff-lineno">Line 750:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Wait for the register writes to finish</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Wait for the register writes to finish</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The series of steps that are required to put a flash chip into the desired quad mode may look very different, because this sequence is completely flash-specific and not standardized at all.</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The series of steps that are required to put a flash chip into the desired quad mode may look very different<ins class="diffchange diffchange-inline"> for other flash chips</ins>, because this sequence is completely flash-specific and not standardized at all.<ins class="diffchange diffchange-inline"><br></ins></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>'''Note:'''<br></div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>'''Note:'''<br></div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some flash chips also support a mode called "Quad I/O" mode or similar. This mode makes the flash chip assume that '''any''' SPI communication happens in quad mode,</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Some flash chips also support a mode called "Quad I/O" mode or similar. This mode makes the flash chip assume that '''any''' SPI communication happens in quad mode,</div></td>
</tr>
</table>
Leon
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=9712&oldid=prev
Leon: /* How to configure quad mode */
2021-02-15T13:42:12Z
<p><span dir="auto"><span class="autocomment">How to configure quad mode</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 13:42, 15 February 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 724:</td>
<td colspan="2" class="diff-lineno">Line 724:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== How to configure quad mode ==</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== How to configure quad mode ==</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In order to configure or setup quad mode in J-Flash SPI, some flash chip-specific information needs to be gathered.</div></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>TBD</div></td>
<td colspan="2" class="diff-empty"> </td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Quad Mode Enable Sequence</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Quad Read Data Command</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>#* Command code</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>#* Address transfer mode</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>#* Number of dummy cycles</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Quad Page Program Command</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>#* Command code</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>#* Address transfer mode</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Usually, all of the above information can be found in the flash chip's datasheet.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>=== Quad mode initialization ===</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File: S25FL512S_QuadModeEnable.png | thumb | Quad Mode Enable Sequence for a Spansion S25FL512S flash]]</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Most flash chips need to be put into a "quad mode" or similar before data can be written or read in quad mode.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In J-Flash SPI, the procedure which enables this mode is referred to as "Quad Mode Enable Sequence".<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In a J-Flash SPI project, this sequence can be configured similar to the init/exit steps. An example for a Quad Mode Enable Sequence can be found in the screenshot pictured on the right.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The pictured sequence enables quad mode for a Spansion S25FL512S flash chip by doing the following:</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Read the configuration register (RDCR command) and store it in a temporary buffer on the host</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Check if the QUAD bit is set (bit position 1)</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># If the QUAD bit is already set, quad mode is already enabled and we are done</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># If the QUAD bit in is not set, set it in the temporary host-buffer (TmpBuf[1] &= (1 << 1))</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Read the status register 1 (RDSR1 command)</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Write the status register 1 and the (adjusted) configuration register</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Wait for the register writes to finish</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The series of steps that are required to put a flash chip into the desired quad mode may look very different, because this sequence is completely flash-specific and not standardized at all.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>'''Note:'''<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Some flash chips also support a mode called "Quad I/O" mode or similar. This mode makes the flash chip assume that '''any''' SPI communication happens in quad mode,</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>meaning that sending any command (not just page program or read data) happens in quad mode.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This type of "Quad I/O" mode is '''not''' supported. Make sure that this mode is not accidentally enabled.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><br clear=all></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>=== Quad Read Data Command ===</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Reading data from a flash in quad mode can be achieved by using a SPI command which behaves the same as the "single" SPI read data command,<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>except for the fact that the read data is sent to the host on four lines instead of just one, increasing the data transfer speed by a factor of 4.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Information about a quad read data command can be found in the flash chip's datasheet. Usually, the command is referred to as "quad read data", "data read quad", "read quad out", or similar.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In the J-Flash SPI project settings, the Quad Read Data Command code needs to be configured (''ReadDataQuad'' field), as well as the address transfer mode for quad page program.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The address transfer mode setting determines if the address bytes that are sent to the flash are sent in quad mode (4 data lines in parallel) or in single mode (1 data line).</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This settings needs to be configured correctly, otherwise proper function cannot be guaranteed.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For the Spansion S25FL512S flash, the Quad Read Data Command code is '''0x6C''' and the address is transferred in '''single mode'''.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>==== Dummy cycles ====</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>When reading data from the target flash chip in quad mode, a specific number of so called "dummy cycles" or "latency cycles" may be sent to the flash chip before receiving actual data.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The number of required dummy cycles depends on the flash chip and may vary depending on the current flash configuration (e.g. configuration register contents), SPI clock frequency, operation mode, etc...</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For the Spansion S25FL512S flash, the number of required dummy cycles for the "read quad out" command at a SPI clock frequency of 50MHz is '''8'''.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>=== Quad Page Program Command ===</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Programming a flash page in quad mode can be achieved by using a SPI command which behaves the same as the "single" SPI page program command,<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>except for the fact that the page data is sent to the flash chip on four lines instead of just one, increasing the data transfer speed by a factor of 4.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Information about a quad page program command can be found in the flash chip's datasheet. Usually, the command is referred to as "quad page program", "pape program quad", or similar.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In the J-Flash SPI project settings, the Quad Page Program Command code needs to be configured (''WritePageQuad'' field), as well as the address transfer mode for quad page program.<br></div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The address transfer mode setting determines if the address bytes that are sent to the flash are sent in quad mode (4 data lines in parallel) or in single mode (1 data line).</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This settings needs to be configured correctly, otherwise proper function cannot be guaranteed.</div></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td colspan="2" class="diff-empty"> </td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>For the Spansion S25FL512S flash, the Quad Page Program Command code is '''0x34''' and the address is transferred in '''single mode'''.</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Device specifics ==</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Device specifics ==</div></td>
</tr>
</table>
Leon
https://wiki.segger.com/index.php?title=J-Flash_SPI&diff=9544&oldid=prev
Leon: /* How to use quad mode */
2021-01-25T11:23:51Z
<p><span dir="auto"><span class="autocomment">How to use quad mode</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 11:23, 25 January 2021</td>
</tr><tr>
<td colspan="2" class="diff-lineno">Line 722:</td>
<td colspan="2" class="diff-lineno">Line 722:</td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>TBD</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>TBD</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker">−</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>== How to <del class="diffchange diffchange-inline">use</del> quad mode ==</div></td>
<td class="diff-marker">+</td>
<td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>== How to <ins class="diffchange diffchange-inline">configure</ins> quad mode ==</div></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td>
</tr>
<tr>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>TBD</div></td>
<td class="diff-marker"> </td>
<td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>TBD</div></td>
</tr>
</table>
Leon