J-Link-OB-nRF5340-NordicSemi

From SEGGER Wiki
Revision as of 16:50, 7 November 2022 by Alex (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This J-Link on-board (OB) is a special version of the J-Link OB that is mounted on many eval boards from Nordic Semiconductor.

Drag and drop programming support

This J-Link OB model supports the drag & drop programming feature. For more information about host OS specifics, potential limitations, ... please refer to the drag and drop programming wiki article.

Drag and drop fails under macOS Ventura

Starting with macOS Ventura, file download via drag & drop could fail with macOS error code 100093. This was caused by a change in behavior of macOS, introduced with that version.
Fixed in J-Link OB firmware that comes with J-Link software V7.82b and later.

WinUSB support

This J-Link OB only supports running in SEGGER driver mode. Driverless / WinUSB mode is not supported for this J-Link OB.

Note: Only applies when running the J-Link OB under Windows. Under Linux / macOS, this mode / setting has no effect.