J-Link PLUS V11

From SEGGER Wiki
Revision as of 10:58, 16 September 2021 by Erik (talk | contribs)
Jump to: navigation, search


This page contains the general, mechanical and electrical specifications of the SEGGER J-Link PLUS V11.


Specifications

Specification Value
General
Supported OS Microsoft Windows (x86/x64), Linux (x86/x64/Arm), macOS (x86)
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5°C ... +60°C
Storage temperature -20°C ... +65 °C
Relative humidity (non-condensing) Max. 90% rH
Mechanical
Size (without cables) 100mm x 53mm x 27mm
Weight (without cables) 70g
Available interfaces
USB interface USB 2.0 (Hi-Speed); USB Type B
Target interface JTAG 20-pin (14-pin and other adapters available)
JTAG/SWD Interface, Electrical
Power supply USB powered Max. 50mA + Target Supply current.
Target interface voltage (VIF) 1.2V ... 5V
Target supply voltage 5V (derived from USB voltage)
Target supply current Max. 300mA
Reset Type Open drain. Can be pulled low or tristated.
Reset low level output voltage (VOL) VOL <= 10% of VIF
For the whole target voltage range (1.2V <= VIF <= 5V)
LOW level input voltage (VIL) VIL <= 40% of VIF
HIGH level input voltage (VIH) VIH >= 60% of VIF
For 1.2V <= VIF <= 3.6V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 80% of VIF
For 3.6 <= VIF <= 5V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 80% of VIF
JTAG/SWD Interface, Timing
Target interface speed Max. 15 MHz
SWO sampling frequency Max. 30 MHz
Data input rise time (Trdi) Trdi <= 20ns
Data input fall time (Tfdi) Tfdi <= 20ns
Data output rise time (Trdo) Trdo <= 10ns
Data output fall time (Tfdo) Tfdo <= 10ns
Clock rise time (Trc) Trc <= 3ns
Clock fall time (Tfc) Tfc <= 3ns