Difference between revisions of "J-Link Remote Server"

From SEGGER Wiki
Jump to: navigation, search
(Usage with different clients)
Line 5: Line 5:
   
 
= Usage with different clients =
 
= Usage with different clients =
* [[SEGGER_Embedded_Studio#Connecting_to_J-Link_via_J-Link_Remote_Server | Embedded Studio]]
+
* [[Connect_to_remote_J-Link_via_J-Link_Tunnel_Server | Embedded Studio]]
 
* [[IAR_EWARM#Connecting_to_J-Link_via_J-Link_Remote_Server | IAR ]]
 
* [[IAR_EWARM#Connecting_to_J-Link_via_J-Link_Remote_Server | IAR ]]
 
* [[Eclipse#Connecting_to_J-Link_via_J-Link_Remote_Server | GDB / Eclipse]]
 
* [[Eclipse#Connecting_to_J-Link_via_J-Link_Remote_Server | GDB / Eclipse]]

Revision as of 10:14, 18 September 2019

J-Link Remote Server is a utility (available as command line or GUI application) that makes a J-Link accessible via IP, be it in the local network or from anywhere on the world. The J-Link itself does not need to provide an Ethernet interface, USB is sufficient.

Usage with different clients