J-Link License Installation

From SEGGER Wiki
Revision as of 14:46, 4 October 2022 by Fabian (talk | contribs) (Managing local / host PC based license)
Jump to: navigation, search

By default a SEGGER Probe (J-Link / J-Trace) come with a varying set of feature licenses. Licenses can be purchased to upgrade a Probe or to use the Probe as dongle for other SEGGER products like Ozone or Embedded Studio.

Such a license can be added/installed using the following methods:

  • Adding the license as local / host PC based license
    • via the J-Link License Manager in case it is a Probe feature license (J-Flash / FlashBP license).
    • via the application the license is for (e.g. Embedded Studio / Ozone).
  • Adding the license as portable / Probe based license.

Managing local / host PC based license

For licenses concerning

Managing portable Probe based license

A limited amount of licenses can be added to the Probe as a portable license, using the J-Link Commander.

With the J-Link Commander portable licenses can be

  • Added
  • Removed
  • Shown

using the "License" command.