Difference between revisions of "J-Run"

From SEGGER Wiki
Jump to: navigation, search
(Added --jlinkscriptfile option)
(One intermediate revision by one other user not shown)
Line 67: Line 67:
 
| Off
 
| Off
 
| Also send target output to stderr.
 
| Also send target output to stderr.
  +
|-
  +
| --jlinkscriptfile <str>
  +
| not set
  +
| Set path of J-Link script file to use to str. Further info: [[J-Link script files]]
 
|-
 
|-
 
| -s
 
| -s
Line 89: Line 93:
 
Reset target...OK
 
Reset target...OK
 
Download 08000000-08002E19...OK
 
Download 08000000-08002E19...OK
SEGGER_SEMIHOST_DebugHalt found at 0x00000000
+
SEGGER_SEMIHOST_DebugHalt found at 0x08000734
 
Start target application...OK
 
Start target application...OK
 
Reading output from target until exit command.
 
Reading output from target until exit command.

Revision as of 13:14, 21 June 2021

J-Run is a command line utility for automated tests. It loads an application (elf) file to the device under test, runs it, and captures the application's output.

The origin on J-Run is described in this blog post: https://blog.segger.com/j-run-automating-performance-tests

Test Applications

J-Run supports any ARM and RISC-V device which is supported by J-Link, and elf output from most toolchains.

The test application can do standard printf-style debug output to the debugger. J-Run supports handling of RTT and Semihosting.

When the test application is finished, it can call the semihosting exit operation or print the wildcard exit string (by default "STOP"), to exit the J-Run test.

The target output is printed to the terminal. It can be redirected to a file or application for further analysis.

Usage

JRun [options] elf-file
Option Default Description
-device str STM32F407IE Set device name to "str".
-if SWD/JTAG SWD Select SWD or JTAG as target interface.
-speed n 4000 Set interface speed to n kHz.
--rtt Auto Force RTT enabled.
--nortt Auto Force RTT disabled.
--semihost Auto Force semihosting enabled.
--nosemihost Auto Force semihosting disabled.
--exit str *STOP* Set exit wildcard to "str".
--quit On Automatically exit J-Run on application exit.
--wait Off Wait for key press on application exit.
--stderr Off Also send target output to stderr.
--jlinkscriptfile <str> not set Set path of J-Link script file to use to str. Further info: J-Link script files
-s Off Work silently.
-v Off Increase verbosity.

Example Output

C:> jrun --wait JRun_Demo.elf
J-Run compiled Aug 15 2019 12:09:19
(c) 2018-2019 SEGGER Microcontroller GmbH    www.segger.com

Open application...OK
Set target device to STM32F407IE...OK
Select SWD interface...OK
Set interface speed to 4000 kHz...OK
Reset target...OK
Download 08000000-08002E19...OK
SEGGER_SEMIHOST_DebugHalt found at 0x08000734
Start target application...OK
Reading output from target until exit command.
==============================================

SEGGER J-Run demo.
 
Took 2582433 cycles

J-Run finished. Press any key to exit.
C:> _
C:> jrun --silent JRun_Demo.elf
SEGGER J-Run demo.
 
Took 2582433 cycles
C:> _