Difference between revisions of "J-Run"

From SEGGER Wiki
Jump to: navigation, search
(Usage)
(One intermediate revision by the same user not shown)
Line 1: Line 1:
J-Run is a test tool to automatically run an application on a target device and receive its terminal output.
+
J-Run is a command line utility for automated tests.
 +
It loads an application (elf) file to the device under test, runs it, and captures the application's output.
  
https://blog.segger.com/j-run-automating-performance-tests
+
The origin on J-Run is described in this blog post: https://blog.segger.com/j-run-automating-performance-tests
  
 +
== Test Applications ==
 +
J-Run supports any ARM and RISC-V device which is supported by J-Link, and elf output from most toolchains.
  
 +
The test application can do standard printf-style debug output to the debugger.
 +
J-Run supports handling of [[RTT]] and [[Semihosting]].
 +
 +
When the test application is finished, it can call the semihosting exit operation or print the wildcard exit string (by default "STOP"),
 +
to exit the J-Run test.
 +
 +
The target output is printed to the terminal. It can be redirected to a file or application for further analysis.
  
 
== Usage ==
 
== Usage ==
Line 11: Line 21:
 
|-
 
|-
 
! Option
 
! Option
! Alias
 
 
! Default
 
! Default
 
! Description
 
! Description
 
|-
 
|-
| -d ''str''
+
| -device ''str''
| --device ''str''
 
 
| STM32F407IE
 
| STM32F407IE
 
| Set device name to "str".
 
| Set device name to "str".
 
|-
 
|-
| --if  ''SWD/JTAG''
+
| -if  ''SWD/JTAG''
|
 
 
| SWD
 
| SWD
 
| Select SWD or JTAG as target interface.
 
| Select SWD or JTAG as target interface.
 
|-
 
|-
| --speed ''n''
+
| -speed ''n''
|
 
 
| 4000
 
| 4000
 
| Set interface speed to n kHz.
 
| Set interface speed to n kHz.
 
|-
 
|-
 
| --rtt
 
| --rtt
|
 
 
| Auto
 
| Auto
 
| Force RTT enabled.
 
| Force RTT enabled.
 
|-
 
|-
 
| --nortt
 
| --nortt
|
 
 
| Auto
 
| Auto
 
| Force RTT disabled.
 
| Force RTT disabled.
 
|-
 
|-
| --sh
+
| --semihost
|
 
 
| Auto
 
| Auto
 
| Force semihosting enabled.
 
| Force semihosting enabled.
 
|-
 
|-
| --nosh
+
| --nosemihost
|
 
 
| Auto
 
| Auto
 
| Force semihosting disabled.
 
| Force semihosting disabled.
 
|-
 
|-
| -x ''str''
 
 
| --exit ''str''
 
| --exit ''str''
 
| *STOP*
 
| *STOP*
Line 56: Line 57:
 
|-
 
|-
 
| --quit
 
| --quit
|
 
 
| On
 
| On
 
| Automatically exit J-Run on application exit.
 
| Automatically exit J-Run on application exit.
 
|-
 
|-
 
| --wait
 
| --wait
|
 
 
| Off
 
| Off
 
| Wait for key press on application exit.
 
| Wait for key press on application exit.
 
|-
 
|-
| -2
 
 
| --stderr
 
| --stderr
 
| Off
 
| Off
Line 71: Line 69:
 
|-
 
|-
 
| -s
 
| -s
| --silent
 
 
| Off
 
| Off
 
| Work silently.
 
| Work silently.
 
|-
 
|-
 
| -v
 
| -v
| --verbose
 
 
| Off
 
| Off
 
| Increase verbosity.
 
| Increase verbosity.
Line 83: Line 79:
 
== Example Output ==
 
== Example Output ==
  
  C:> jrun SEGGER_RTT_JRun_Demo.elf
+
  C:> jrun --wait JRun_Demo.elf
 
+
J-Run compiled Aug 15 2019 12:09:19
  (c) 2018 SEGGER Microcontroller GmbH    www.segger.com
+
  (c) 2018-2019 SEGGER Microcontroller GmbH    www.segger.com
  J-Run compiled Mar 19 2018 10:31:28
+
   
 
 
 
  Open application...OK
 
  Open application...OK
  Set target device to MK66FN2M0xxx18...OK
+
  Set target device to STM32F407IE...OK
 
  Select SWD interface...OK
 
  Select SWD interface...OK
 
  Set interface speed to 4000 kHz...OK
 
  Set interface speed to 4000 kHz...OK
 
  Reset target...OK
 
  Reset target...OK
  Download 00000000-0000234F...OK
+
  Download 08000000-08002E19...OK
  Download 00002350-00002397...OK
+
  SEGGER_SEMIHOST_DebugHalt found at 0x00000000
Set RTT control block at 0x20002090...OK
 
 
  Start target application...OK
 
  Start target application...OK
  Start RTT...OK
+
  Reading output from target until exit command.
  Read terminal data...
+
  ==============================================
 
+
 
  SEGGER J-Run demo.
 
  SEGGER J-Run demo.
 
    
 
    
 
  Took 2582433 cycles
 
  Took 2582433 cycles
 
+
 +
J-Run finished. Press any key to exit.
 
  C:> _
 
  C:> _
  
  C:> jrun --silent SEGGER_RTT_JRun_Demo.elf
+
  C:> jrun --silent JRun_Demo.elf
 
  SEGGER J-Run demo.
 
  SEGGER J-Run demo.
 
    
 
    
 
  Took 2582433 cycles
 
  Took 2582433 cycles
 
 
  C:> _
 
  C:> _

Revision as of 14:29, 15 August 2019

J-Run is a command line utility for automated tests. It loads an application (elf) file to the device under test, runs it, and captures the application's output.

The origin on J-Run is described in this blog post: https://blog.segger.com/j-run-automating-performance-tests

Test Applications

J-Run supports any ARM and RISC-V device which is supported by J-Link, and elf output from most toolchains.

The test application can do standard printf-style debug output to the debugger. J-Run supports handling of RTT and Semihosting.

When the test application is finished, it can call the semihosting exit operation or print the wildcard exit string (by default "STOP"), to exit the J-Run test.

The target output is printed to the terminal. It can be redirected to a file or application for further analysis.

Usage

JRun [options] elf-file
Option Default Description
-device str STM32F407IE Set device name to "str".
-if SWD/JTAG SWD Select SWD or JTAG as target interface.
-speed n 4000 Set interface speed to n kHz.
--rtt Auto Force RTT enabled.
--nortt Auto Force RTT disabled.
--semihost Auto Force semihosting enabled.
--nosemihost Auto Force semihosting disabled.
--exit str *STOP* Set exit wildcard to "str".
--quit On Automatically exit J-Run on application exit.
--wait Off Wait for key press on application exit.
--stderr Off Also send target output to stderr.
-s Off Work silently.
-v Off Increase verbosity.

Example Output

C:> jrun --wait JRun_Demo.elf
J-Run compiled Aug 15 2019 12:09:19
(c) 2018-2019 SEGGER Microcontroller GmbH    www.segger.com

Open application...OK
Set target device to STM32F407IE...OK
Select SWD interface...OK
Set interface speed to 4000 kHz...OK
Reset target...OK
Download 08000000-08002E19...OK
SEGGER_SEMIHOST_DebugHalt found at 0x00000000
Start target application...OK
Reading output from target until exit command.
==============================================

SEGGER J-Run demo.
 
Took 2582433 cycles

J-Run finished. Press any key to exit.
C:> _
C:> jrun --silent JRun_Demo.elf
SEGGER J-Run demo.
 
Took 2582433 cycles
C:> _