J-Trace Cortex-M V3

From SEGGER Wiki
Revision as of 11:13, 11 January 2022 by Leon (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER J-Trace for Cortex-M V3.

Note:

The J-Trace Cortex-M V3 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER. Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.
We recommend to make use of the SEGGER Trade-In-Program to upgrade to the current version of the product.

When new features are added, articles for legacy models may not be updated.

So if a feature is not mentioned here at all, it can be assumed as "not supported".


Hardware and Software Features

Hardware version 3
Hardware Features
USB 2.0 Full Speed YES.png
USB 2.0 Hi-Speed YES.png
cJTAG interface NO.png
JTAG interface YES.png
SWD interface YES.png
SWO interface YES.png
ETB Trace Cortex-M YES.png
ETM Trace Cortex-M YES.png
Streaming Trace NO.png
VCOM NO.png
Memory Stop mode support NO.png
Cortex-M Monitor Mode debugging NO.png
SWD Multi-Drop YES.png
CMSIS-DAP mode NO.png
ARM Cortex Cores
Cortex-A53 NO.png
Cortex-A57 NO.png
Cortex-A72 NO.png
Cortex-M0 YES.png
Cortex-M0+ YES.png
Cortex-M1 YES.png
Cortex-M3 YES.png
Cortex-M4 YES.png
Cortex-M7 YES.png
Cortex-M23 NO.png
Cortex-M33 NO.png
SC000 (M0 secure) YES.png
SC300 (M3 secure) YES.png
RISC-V
RV32 NO.png
RV64 NO.png