J-Trace PRO Cortex-M V1

This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER J-Trace PRO Cortex-M V1.

Note:

The J-Trace PRO Cortex-M V1 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER. Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.
We recommend to make use of the SEGGER Trade-In-Program to upgrade to the current version of the product.

When new features are added, articles for legacy models may not be updated.

So if a feature is not mentioned here at all, it can be assumed as "not supported".

Hardware and Software Features

Hardware version	1
Hardware Features
USB 2.0 Hi-Speed
USB 3.0 SuperSpeed
Gigabit-Ethernet
cJTAG interface
JTAG interface
SWD interface
SWO interface
ETB Trace Cortex-M
ETM Trace Cortex-M
Streaming Trace
VCOM
Memory Stop mode support
Cortex-M Monitor Mode debugging
5 V Target Supply
SWD Multi-Drop
CMSIS-DAP mode
ARM Cortex Cores
Cortex-A53
Cortex-A57
Cortex-A72
Cortex-M0
Cortex-M0+
Cortex-M1
Cortex-M3
Cortex-M4
Cortex-M7
Cortex-M23
Cortex-M33
SC000 (M0 secure)
SC300 (M3 secure)
RISC-V
RV32
RV64