J-Trace PRO Cortex-M V1

From SEGGER Wiki
Revision as of 14:22, 10 December 2021 by Leon (talk | contribs) (Created page with "This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER '''J-Trace PRO Cortex-M...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER J-Trace PRO Cortex-M V1.

Note:

The J-Trace PRO Cortex-M V1 has been superseded and as such is considered a legacy device. This device is not eligible for support by SEGGER.

Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.


Hardware and Software Features

Hardware version 1
Hardware Features
USB 2.0 Hi-Speed YES.png
USB 3.0 SuperSpeed NO.png
Gigabit-Ethernet YES.png
cJTAG interface NO.png
JTAG interface YES.png
SWD interface YES.png
SWO interface YES.png
ETB Trace Cortex-M YES.png
ETM Trace Cortex-M YES.png
Streaming Trace YES.png
VCOM NO.png
Memory Stop mode support YES.png
Cortex-M Monitor Mode debugging YES.png
5 V Target Supply NO.png
SWD Multi-Drop YES.png
CMSIS-DAP mode NO.png
ARM Cortex Cores
Cortex-A53 NO.png
Cortex-A57 NO.png
Cortex-A72 NO.png
Cortex-M0 YES.png
Cortex-M0+ YES.png
Cortex-M1 YES.png
Cortex-M3 YES.png
Cortex-M4 YES.png
Cortex-M7 YES.png
Cortex-M23 YES.png
Cortex-M33 YES.png
SC000 (M0 secure) YES.png
SC300 (M3 secure) YES.png
RISC-V
RV32 NO.png
RV64 NO.png