View source for Kinetis KE1xZ 48 MHz series

__TOC__

The NXP Kinetis KE1xZ 48 MHz series is designed for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.

= J-Link support =
The KE14Z32, KE14Z64, KE15Z32, KE15Z64, KE16Z32, KE16Z64 are supported since the following J-Link software versions:
* V6.35g (beta) or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPackBeta Download latest beta]
* V6.36 (release) or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download latest release]

= Watchdog support =
Debugging and flash programming with the watchdog (WDOG) being enabled (in non-windowed mode) is supported. Windowed mode of the watchdog is not supported for debugging and flash programming.

= MTB trace =
The KE1xZ 48 MHz series devices incorporate an ARM MTB on-chip trace buffer that allows instruction backtrace. For more information about MTB in general, please refer to here: [[MTB specifics | Article MTB]].

= Example projects =
[https://wiki.segger.com/Tracing_on_NXP_Kinetis_KE1xZ MTB Trace]

=== Requirements ===
The following are the min. requirements to run the example project:
* SEGGER Embedded Studio V3.52 or later
* J-Link software V6.36 or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation)
* Board: [https://wiki.segger.com/FRDM-KE16Z FRDM-KE16Z]

<references/>