Difference between revisions of "Kinetis KE1xZ 48 MHz series"

From SEGGER Wiki
Jump to: navigation, search
(J-Link support)
Line 1: Line 1:
 
__TOC__
 
__TOC__
   
The NXP Kinetis KE1xZ 48 MHz series is deigned for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.
+
The NXP Kinetis KE1xZ 48 MHz series is designed for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.
   
 
= J-Link support =
 
= J-Link support =

Revision as of 12:23, 25 September 2018

The NXP Kinetis KE1xZ 48 MHz series is designed for white goods and industrial applications. It incorporates an ARM Cortex-M0+ core.

J-Link support

The KE14Z32, KE14Z64, KE15Z32, KE15Z64, KE16Z32, KE16Z64 are supported since the following J-Link software versions:

Watchdog support

Debugging and flash programming with the watchdog (WDOG) being enabled (in non-windowed mode) is supported. Windowed mode of the watchdog is not supported for debugging and flash programming.

MTB trace

The KE1xZ 48 MHz series devices incorporate an ARM MTB on-chip trace buffer that allows instruction backtrace. For more information about MTB in general, please refer to here: Article MTB.

Example projects

TBD

Requirements

The following are the min. requirements to run the example project:

  • SEGGER Embedded Studio Vxxx or later
  • J-Link software V6.35g or later. (Install after Embedded Studio and let J-Link installer update the Embedded Studio installation)
  • xxx board