Difference between revisions of "LAUNCHXL CC2650"

From SEGGER Wiki
Jump to: navigation, search
(Connecting via J-Link)
(Connecting via J-Link)
Line 4: Line 4:
 
== Connecting via J-Link ==
 
== Connecting via J-Link ==
   
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''': TCK, TMS, TDI, TDO, SWO, RESET.
+
In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be '''open''':
  +
  +
*TCK
  +
*TMS
  +
*TDI
  +
*TDO
  +
*SWO
  +
*RESET.
   
 
Otherwise the on board debugger by TI interferes with J-Link.
 
Otherwise the on board debugger by TI interferes with J-Link.

Revision as of 17:14, 3 July 2018

The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default.

Connecting via J-Link

In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be open:

  • TCK
  • TMS
  • TDI
  • TDO
  • SWO
  • RESET.

Otherwise the on board debugger by TI interferes with J-Link.

WIKI TI LAUNCHXL CC2650.png