LAUNCHXL CC2650

From SEGGER Wiki
Revision as of 17:24, 3 July 2018 by Leon (talk | contribs) (Created page with " The TI LAUNCHXL CC2640R2 evaluation board does come with an on board debugger which drives the debug signals by default. == Connecting via J-Link == In order to connect to...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The TI LAUNCHXL CC2640R2 evaluation board does come with an on board debugger which drives the debug signals by default.

Connecting via J-Link

In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumper must be open: TCK, TMS, TDI, TDO, SWO, RESET.

Otherwise the on board debugger by TI interferes with J-Link.

WIKI TI LAUNCHXL CC2650.png

Retrieved from "https://wiki.segger.com/index.php?title=LAUNCHXL_CC2650&oldid=2927"