LAUNCHXL CC2650

From SEGGER Wiki
Revision as of 16:26, 3 July 2018 by Leon (talk | contribs) (Connecting via J-Link)
Jump to: navigation, search

The TI LAUNCHXL CC2650 evaluation board does come with an on board debugger which drives the debug signals by default.

Connecting via J-Link

In order to connect to the LAUNCHXL CC2650 board via J-Link the following jumpers must be open: TCK, TMS, TDI, TDO, SWO, RESET.

Otherwise the on board debugger by TI interferes with J-Link.

WIKI TI LAUNCHXL CC2650.png