Difference between revisions of "LPC845"
(Created page with "__TOC__ ==MTB Trace== For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buff...") |
(→MTB Trace) |
||
| Line 4: | Line 4: | ||
For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buffer are not possible. The J-Link software worksaround this and still gives the user a out-of-the-box experience when using MTB trace on this device. |
For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buffer are not possible. The J-Link software worksaround this and still gives the user a out-of-the-box experience when using MTB trace on this device. |
||
J-Link software V6.46 or later is required to use MTB on this device series. |
J-Link software V6.46 or later is required to use MTB on this device series. |
||
| + | |||
A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: |
A sample project that demonstrates MTB backtrace via Ozone on this device can be found here: |
||
Revision as of 14:07, 29 April 2019
Contents
MTB Trace
For the LPC84x series, MTB support was implemented by NXP in a non-standard way so that various things like CoreSight auto-detection of MTB and its buffer are not possible. The J-Link software worksaround this and still gives the user a out-of-the-box experience when using MTB trace on this device. J-Link software V6.46 or later is required to use MTB on this device series.
A sample project that demonstrates MTB backtrace via Ozone on this device can be found here:
