LPCXpresso4337 V3

From SEGGER Wiki
Revision as of 19:06, 10 February 2017 by Erik (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Enable Debugging via SWD

In order to use the J-Link to debug the LPC4337 on the board, the following changes needs to be done:

  • Remove JP1
  • Manually connect Pin1 of the SWD debug connector (P1) to 3.3V (VTref)
  • Connect the J-Link to the target using the SWD debug connector (P1)
Retrieved from "https://wiki.segger.com/index.php?title=LPCXpresso4337_V3&oldid=890"