Difference between revisions of "LPCXpresso54608 Eval"
| Line 1: | Line 1: | ||
| − | [[File:NXP_LPCXpresso54608Eval | thumb | right | 400px | NXP LPCXpresso54608 Eval]] |
+ | [[File:NXP_LPCXpresso54608Eval.jpg | thumb | right | 400px | NXP LPCXpresso54608 Eval]] |
The NXP LPCXpresso54608 Eval is an evaluation board for the LPC54608J512 (Cortex-M4) device. |
The NXP LPCXpresso54608 Eval is an evaluation board for the LPC54608J512 (Cortex-M4) device. |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 15:51, 15 October 2020
The NXP LPCXpresso54608 Eval is an evaluation board for the LPC54608J512 (Cortex-M4) device.
Contents
SWO
SWO for all LPC546xx devices is supported out-of-the-box. Please refer to LPC546xx
SWO Pin used
On the PCXpresso54608 Eval, PIO0_10 has been wired by NXP as SWO output pin.
Sample projects
Requirements
- J-Link V10 (or higher) / J-Trace Pro
- Embedded Studio for ARM V5.10b or higher (for the ES sample)
- IAR EWARM V8.40A (for the IAR project)
Project files
The following sample projects that demonstrate SWO on the LPCXpresso54608 Eval are available:
Envedded Studio
This example project does not require any extra settings by the user. The SWO stream can be viewed from within Embedded Studio, or with e.g. J-Link SWO Viewer which is included in the J-Link Software and Documentation Pack and is available for free. This project has been created with Embedded Studio for ARM V5.10b.
IAR EWARM
Note: IAR sets the SWO base clock to be CPUClock/2, therefore the project setting "CPU clock" must be set to CPUClock/2. Any other value will not output the SWO printf stream.
