LPCXpresso V2/V3 based boards

From SEGGER Wiki
Revision as of 10:06, 23 October 2018 by Erik (talk | contribs) (Created page with "==Using LPC-Link 2 on LPCXpresso V2/V3== For the LPCXpresso V2/V3 and the LPC-Link 2 is a firmware available which allows to "convert" the on-board LPC-Link to a J-Link OB so...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Using LPC-Link 2 on LPCXpresso V2/V3

For the LPCXpresso V2/V3 and the LPC-Link 2 is a firmware available which allows to "convert" the on-board LPC-Link to a J-Link OB so an external debug probe is not necessary. For further information please refer to our website: https://www.segger.com/lpc-link-2.html