Difference between revisions of "Main Page"
(→IDE and Debugger specifics) |
(→IDE and Debugger specifics) |
||
| Line 26: | Line 26: | ||
==== IDE and Debugger specifics ==== |
==== IDE and Debugger specifics ==== |
||
* [[SEGGER Embedded Studio]] |
* [[SEGGER Embedded Studio]] |
||
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#ETB trace on NXP TWR-K65F|ETB trace on NXP TWR-K65F]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#How to configure Embedded Studio to use SWO|How to configure Embedded Studio to use SWO]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#VCS configuration|VCS configuration]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#Installation on newer Linux versions|Installation on newer Linux versions]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#How to enable RTOS thread awareness|How to enable RTOS thread awareness]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#How to place a function in RAM|How to place a function in RAM]] |
| − | **[[ |
+ | **[[SEGGER Embedded_Studio#How to use an external toolchain with Embedded Studio|How to use an external toolchain with Embedded Studio]] |
* [[SEGGER Ozone]] |
* [[SEGGER Ozone]] |
||
**[[SEGGER Ozone#Automated_test_example|Automated test example]] |
**[[SEGGER Ozone#Automated_test_example|Automated test example]] |
||
| Line 40: | Line 40: | ||
* [[TI Code Composer Studio]] |
* [[TI Code Composer Studio]] |
||
* [[IAR EWARM]] |
* [[IAR EWARM]] |
||
| + | **[[IAR EWARM#Using J-Link with an existing project|Using J-Link with an existing project]] |
||
| + | **[[IAR EWARM#Using the J-Link Flash loader|Using the J-Link Flash loader]] |
||
| + | **[[IAR EWARM#Using J-Link script files|Using J-Link script files]] |
||
| + | **[[IAR EWARM#RDI|RDI]] |
||
| + | **[[IAR EWARM#SWO|SWO]] |
||
| + | **[[IAR EWARM#Connecting to a specific J-Link|Connecting to a specific J-Link]] |
||
| + | |||
** [[How to configure SWO for EWARM V8]] |
** [[How to configure SWO for EWARM V8]] |
||
* [[Keil MDK-ARM]] |
* [[Keil MDK-ARM]] |
||
Revision as of 18:30, 23 October 2018
Welcome to the SEGGER - Support Wiki
Contents
- 1 Debug Probes - J-Link & J-Trace
- 1.1 J-Link
- 1.1.1 Troubleshooting
- 1.1.2 IDE and Debugger specifics
- 1.1.3 J-Link specifics
- 1.1.4 Device specifics
- 1.1.4.1 ARM
- 1.1.4.2 Ambiq Micro
- 1.1.4.3 Analog Devices
- 1.1.4.4 Atmel
- 1.1.4.5 Cypress
- 1.1.4.6 Dialog Semiconductor
- 1.1.4.7 Infineon
- 1.1.4.8 Intel
- 1.1.4.9 MediaTek
- 1.1.4.10 Microchip
- 1.1.4.11 Nordic Semi
- 1.1.4.12 NXP
- 1.1.4.13 Renesas
- 1.1.4.14 Silicon Labs
- 1.1.4.15 SiFive
- 1.1.4.16 ST
- 1.1.4.17 TI
- 1.1.4.18 Toshiba
- 1.1.4.19 Zilog
- 1.1.5 Evaluation board specifics
- 1.1.6 Flash programming
- 1.1.7 Open Flashloader
- 1.2 J-Trace
- 1.3 Getting Started with Various IDEs
- 1.1 J-Link
- 2 Embedded Studio
- 3 Miscellaneous
Debug Probes - J-Link & J-Trace
J-Link
Troubleshooting
- Debug session does not start
- J-Link cannot connect to the CPU
- Could not open J-Link shared library
- J-Link shown as generic BULK device in Windows
- J-Link-OB SAM3U
- J-Link-OB-RX621-ARM-SWD
- SPI Flash
- Unlimited Number of Breakpoints in Flash
- Debugging self-modifying code in flash
- Cannot update firmware of Flasher Portable
- Manual setup of JTAG chain
- Access to illegal addresses causes core to crash
- J-Trace PRO USB driver problems
- J-Link no USB enumeration
- J-Link LITE incorrectly shown as SAM-ICE
- Incorrect J-Link USB driver installed
IDE and Debugger specifics
J-Link specifics
Device specifics
ARM
Ambiq Micro
Analog Devices
Atmel
Cypress
Dialog Semiconductor
Infineon
Intel
MediaTek
Microchip
Nordic Semi
NXP
- S32K11x series
- S32K14x series
- Kinetis Series Devices
- iMX Series Devices
- LPC Series Devices
Renesas
Silicon Labs
SiFive
ST
- Connecting to STM32 Nucleo boards
- Using SWO on STM327xxG evaluation boards
- Setting read out protection on STM32F0 devices
- Secured ST device detected
- STR91x
- STM32
TI
Toshiba
Zilog
Evaluation board specifics
ARM
Ambiq Micro
Adafruit
Atmel
Infineon
Microchip
Renesas
SiFive
Silicon Labs
TI
- LAUNCHXL CC2640R2
- LAUNCHXL CC2650
- CC1310 LaunchPad
- CC1350 LaunchPad
- CC3220 LaunchPad
- TM4C123G LaunchPad
NXP
- FRDM-KE16Z
- FRDM-KW41Z
- IMX6UL-EVK
- IMX6ULL-EVK
- LPCXpresso4337 V3
- LPCXpresso LPC1769
- LPCXpresso V2/V3 based boards
- TWR-KV58F220M
ST
- SPC560D-Discovery Evalboard
- STM3241G-EVAL
- STM32F746 Discovery
- STM32F769I EVAL
- STM32H743I-EVAL
- STM32L476 Discovery
- STM32L476 Eval
- STEVAL-FCU001V1
Xilinx
Flash programming
Open Flashloader
J-Trace
- General information about tracing
- MTB specifics
- How to configure JLinkScript files to enable tracing
- Tracing on Atmel ATSAMA5D2
- Tracing on Atmel ATSAMD51
- Tracing on Atmel ATSAME54
- Tracing on Atmel ATSAME70
- Tracing on Atmel ATSAMV71
- Tracing on Infineon XMC4400 series MCUs
- Tracing on Infineon XMC4500 series MCUs
- Tracing on Nordic Semiconductor nRF52
- Tracing on NXP iMX RT1050 (iMX RT1050 Trace Reference Board)
- Tracing on NXP LPC1768
- Tracing on NXP LPC1788
- Tracing on NXP LPC1857
- Tracing on NXP LPC4350
- Tracing on NXP LPC4357
- Tracing on NXP Kinetis MK21FN1M0
- Tracing on NXP Kinetis MK40
- Tracing on NXP Kinetis MK60N512
- Tracing on NXP Kinetis MK64FN1M0
- Tracing on NXP Kinetis MK66FN2M0 (SEGGER emPower Board)
- Tracing on NXP Kinetis MK70FN1M0
- Tracing on NXP Kinetis MK80FN2
- Tracing on NXP Kinetis MKL25
- Tracing on NXP Kinetis MKL82
- Tracing on NXP Kinetis MKV58F1M0
- Tracing on NXP Kinetis MKW24D512
- Tracing on NXP Kinetis KE1xZ
- Tracing on Renesas Synergy R7FS7G2
- Tracing on Renesas R7S721001WS (RZ/A1H)
- Tracing on Renesas R7S910017 (RZ/T1)
- Tracing on Silicon Labs EFM32GG11B
- Tracing on Silicon Labs EFM32GG990
- Tracing on Silicon Labs EFM32PG12
- Tracing on Silicon Labs EZR32LG330
- Tracing on Silicon Labs EZR32WG330
- Tracing on ST STM32F107
- Tracing on ST STM32F207
- Tracing on ST STM32F303
- Tracing on ST STM32F407 (SEGGER Cortex-M Trace Reference Board)
- Tracing on ST STM32F417
- Tracing on ST STM32F429
- Tracing on ST STM32F437
- Tracing on ST STM32F439
- Tracing on ST STM32F446
- Tracing on ST STM32F746
- Tracing on ST STM32F756
- Tracing on ST STM32F767
- Tracing on ST STM32F769
- Tracing on ST STM32F779
- Tracing on ST STM32H743 (SEGGER STM32H7 Trace Reference Board)
- Tracing on ST STM32H743
- Tracing on ST STM32H753
- Tracing on ST STM32L476
- Tracing on ST STM32L4R
- Tracing on ST STM32L4S
- Tracing on ST STM32L152
- Tracing on TI MSP432E4
- Tracing on TI RM57L843
- Tracing on TI TM4C129
- Tracing on Toshiba TMPM370
- Tracing on Toshiba TMPM440
- Getting unknown addresses in instruction trace
Keil MDK
Getting Started with Various IDEs
Embedded Studio
Miscellaneous
Glossary / Definitions
J-Link software
- J-Link Software and Documentation Pack
- Enable J-Link log file
- Using J-Link Script Files
- Using J-Link Command Strings
- Read-Modify-Write Flash
- Using J-Link VCOM functionality
- J-Link Commander
- RTT
- Memory accesses
- Setting up Ethernet interface
CALLIOPE mini
J-Flash
SystemView
FAQ
- Using Ethernet in TI's Code Composer Studio (CCS)
- Software and Hardware Features Overview
- Multiple J-Links at the same PC
- OpenOCD
- Using J-Link on VirtualBox under Ubuntu
- Flashing Cypress PSoC Creator output data files with J-Flash
- Programming External SPI Flashes
- Unlock maximum SWO speed on SEGGER's high end debug probes
- J-Trace vs. J-Trace PRO
