Microchip MPLAB X

From SEGGER Wiki
Revision as of 10:22, 9 October 2020 by Matthias (talk | contribs) (Created page with "= Using a Microchip MPLAB X Project With J-Link = In order to get started with J-Link and [http://www.microchip.com/mplab/mplab-x-ide MPLAB X] by Microchip install the latest...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Using a Microchip MPLAB X Project With J-Link

In order to get started with J-Link and MPLAB X by Microchip install the latest SEGGER software and documentation pack. Please verify that your J-Link software is up to date. For detailed instructions on how to install and use MPLAB X, please refer to the MPLAB X wiki and the getting started with J-Link guide by Microchip.

  • Open Tools | Plugins
  • Select the Available Plugins tab
  • Press Reload Catalog
  • Install the SEGGER JLink Probe plugin
  • After restarting the IDE, the SEGGER JLink Probe plugin will shop up in the Installed tab, as shown below

Microchip MPLAB X Tutorial 1.png

  • Make sure the SEGGER JLink Probe plugin is marked as active
  • Open the Project Properties by selecting Properties in the contexmenu of your project, or by opening File | Project Properties.
  • In the Project Properties, select SEGGER J-Link as used Hardware Tool, and press Apply.

Microchip MPLAB X Tutorial 2.png

  • Now the project is ready to be debugged with J-Link.

Microchip MPLAB X Tutorial 3.png

Retrieved from "https://wiki.segger.com/index.php?title=Microchip_MPLAB_X&oldid=8995"