MindMotion MM32F0
Revision as of 11:12, 28 November 2022 by Torben.scharping (talk | contribs) (Created page with "__TOC__ The Mimdmotion MM32F0 series are 32-bit general-purpose microcontrollers based on the Arm® Cortex®-M0 processor.<br> ==Devive Family== {| class="seggertable" |- ! D...")
Contents
The Mimdmotion MM32F0 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M0 processor.
Devive Family
| Device | Flash Size | RAM Size | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MM32F001 | 16Kb | 2Kb | ||||||||
| MM32F002 | 32Kb | 2Kb | ||||||||
| MM32F003 | 16Kb | 2Kb | - | MM32F004 | 32Kb | 4Kb | ||||
| MM32F013 | 64Kb | 16Kb | - | MM32F014 | 64Kb | 8Kb | - | MM32F031 | 32Kb | 4Kb |
| MM32F0270 | 128Kb | 16Kb |
*** Additional information ***
In order to prevent errors when reading first time, the DLL intialises the first 24Kb of RAM starting at 0x2000 0000.
Supported Flash Banks
Internal Flash
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| GD32A503xB | 0x08000000 | 128Kb | YES |
| GD32A503xC | 0x08000000 | 256Kb | YES |
| GD32A503xD | 0x08000000 | 384Kb | YES |
Option Byte
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| GD32A503xB | 0x1FFFF800 | 24 Byte | YES |
| GD32A503xC | 0x1FFFF800 | 24 Byte | YES |
| GD32A503xD | 0x1FFFF800 | 24 Byte | YES |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82b or later
Evaluation Boards
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL
Example Application
- GigaDevice GD32A503-EVAL evaluation board: https://wiki.segger.com/GigaDevice_GD32A503-EVAL#Example_Project
