Difference between revisions of "MindMotion MM32F3"
Line 35: | Line 35: | ||
==Evaluation Boards== |
==Evaluation Boards== |
||
− | *Mindmotion |
+ | *Mindmotion MM32F3270 MB-036 evaluation board: https://wiki.segger.com/Mindmotion-MB-036 |
− | *Mindmotion MM32F0130 MB-025 evaluation board: https://wiki.segger.com/Mindmotion-MB-025 |
||
− | *Mindmotion MM32F0140 MM32_LQFP48 evaluation board: https://wiki.segger.com/Mindmotion-MM32_LQFP48 |
||
− | *Mindmotion MM32F0270 NANO-F0270 evaluation board: https://wiki.segger.com/Mindmotion-NANO-F0270 |
||
Revision as of 12:13, 28 November 2022
Contents
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M3 processor.
Device Family
Device Family | Flash Size | RAM Size |
---|---|---|
MM32F327 | up to 512Kb | 128Kb |
Supported Flash Banks
Internal Flash
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F327 | 0x08000000 | up to 512Kb | Yes |
- Unlocking of Flash read protection not supported yet.
Option Byte
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F027 | 0x1FFFF800 | 40b | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82d or later
Evaluation Boards
- Mindmotion MM32F3270 MB-036 evaluation board: https://wiki.segger.com/Mindmotion-MB-036