Difference between revisions of "MindMotion MM32F3"
(→Option Byte) |
|||
| Line 33: | Line 33: | ||
==Minimum requirements== |
==Minimum requirements== |
||
| − | * J-Link software V7. |
+ | * J-Link software V7.82e or later |
==Evaluation Boards== |
==Evaluation Boards== |
||
Revision as of 16:11, 9 December 2022
Contents
The Mimdmotion MM32F3 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M3 processor.
Device Family
| Device Family | Flash Size | RAM Size |
|---|---|---|
| MM32F327 | up to 512Kb | 128Kb |
Supported Flash Banks
Internal Flash
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32F327 | 0x08000000 | up to 512Kb | Yes |
- Unlocking of Flash read protection not supported yet.
Option Byte
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32F327 | 0x1FFFF800 | 40b | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Evaluation Boards
- Mindmotion MM32F3270 MB-036 evaluation board: https://wiki.segger.com/Mindmotion-MB-036
