NXP S32K148
Contents
The NXP S32K148 series are Cortex-M4 based 32-bit microcontrollers.
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Program flash | 0x00000000 | Up to 1536 KB | |
FlexNVM | 0x10000000 | 512 KB |
Note:
The program flash memory contains a 16-byte flash configuration field at address 0x400 that stores default protection settings and security information that allows the MCU to restrict access to the FTFM module.
The register portion of the flash configuration field is loaded into associated flash registers during the reset sequence.
Programming this area may lead to the device being protected or locked
Watchdog Handling
- The device has a watchdog (WDOG).
- The watchdog is fed during flash programming.
Device Specific Handling
Connect
- The J-Link determines the security state as part of the connect sequence. If a secured device is detected, an un-secure is offered via dialog.
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Evaluation Boards
- TBD
Example Application
- TBD