Difference between revisions of "ONSemi RSL10"
(→Reset) |
(Added third party note for ONSemi RSL10 device) |
||
| Line 2: | Line 2: | ||
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption. |
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption. |
||
| + | |||
| + | ==Debug Support== |
||
| + | The J-Link support for the ONSemi RSL10 device comes without any warranty and support from SEGGER Microcontroller GmbH. |
||
| + | |||
| + | Support is provided by ON Semiconductor only. |
||
| + | For support, please refer to: |
||
| + | [https://www.onsemi.com/PowerSolutions/ticrequest.do https://www.onsemi.com/PowerSolutions/ticrequest.do] |
||
| + | |||
==On-Chip Memory Regions== |
==On-Chip Memory Regions== |
||
The internal flash is divided into 5 different regions: |
The internal flash is divided into 5 different regions: |
||
Revision as of 12:30, 15 February 2021
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption.
Debug Support
The J-Link support for the ONSemi RSL10 device comes without any warranty and support from SEGGER Microcontroller GmbH.
Support is provided by ON Semiconductor only. For support, please refer to: https://www.onsemi.com/PowerSolutions/ticrequest.do
On-Chip Memory Regions
The internal flash is divided into 5 different regions:
| Instance Name | Size (bytes) | Memory region |
|---|---|---|
| Main Flash | 393216 | 0x00100000 - 0x0015FFFF |
| Non-Volatile Record (NVR) 1 | 2048 | 0x00080000 - 0x000807FF |
| Non-Volatile Record (NVR) 2 | 2048 | 0x00080800 - 0x00080FFF |
| Non-Volatile Record (NVR) 3 | 2048 | 0x00081000 - 0x000807FF |
| Non-Volatile Record (NVR) 4 (Manufacturing Test) |
1024 | 0x00081800 - 0x00080BFF |
NOTE: J-Link supports the Main Flash as well as NVR1 - NVR3.
Reset
It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which makes sure that CPU is halted right before the target application but after boot ROM.
Evaluation Boards
- ON Semiconductor RSL10 SiP evaluation board: https://wiki.segger.com/ONSemi_RSL10_SiP
Example Application
- ON Semiconductor RSL10 SiP evaluation board: https://wiki.segger.com/ONSemi_RSL10_SiP#Example_Project
