Difference between revisions of "Qorvo device specifics"
(Created page with "asd") |
|||
| Line 1: | Line 1: | ||
| + | By default, the debug interface and flash programming ROM API of Qorvos Cortex-M4 based devices is disabled and needs to be enabled by executing a special sequence. Unfortunately, it cannot be detected if the sequence needs to be executed or not so the DLL must always perform it on connect. |
||
| − | asd |
||
| + | |||
| + | '''Attach to a running system''' |
||
| + | Due to the |
||
| + | |||
| + | '''Affected families''': |
||
| + | *GP570 |
||
| + | *GP870 |
||
| + | *UE878 |
||
| + | *QPG6095 |
||
Revision as of 10:18, 8 October 2019
By default, the debug interface and flash programming ROM API of Qorvos Cortex-M4 based devices is disabled and needs to be enabled by executing a special sequence. Unfortunately, it cannot be detected if the sequence needs to be executed or not so the DLL must always perform it on connect.
Attach to a running system Due to the
Affected families:
- GP570
- GP870
- UE878
- QPG6095
