Difference between revisions of "RA6M4"
(Created page with "__TOC__ = Minimum requirements = The Renesas RA6M4 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW support...") |
m (Fabian moved page J-Link Renesas RA6M4 to Renesas RA6M4: Not a J-Link product) |
(No difference)
| |
Revision as of 16:24, 21 December 2020
Contents
Minimum requirements
The Renesas RA6M4 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW support which is not provided by older J-Link models. The following table lists the minimum J-Link HW version needed to support this MCU.
- J-Link-OB-S124
- J-Link BASE V10
- J-Link PLUS V10
- J-Link ULTRA+ V4
- J-Link PRO V4
- J-Link WiFi V1
- J-Trace PRO V2 Cortex-M
- J-Trace PRO V2 Cortex
Later versions (e.g. V10 is listed and current HW is V11) will also work.
Note: Models which are not listed here do not support this MCU.
