RA6M4

From SEGGER Wiki
Revision as of 12:35, 17 December 2020 by Alex (talk | contribs) (Created page with "__TOC__ = Minimum requirements = The Renesas RA6M4 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW support...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Minimum requirements

The Renesas RA6M4 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW support which is not provided by older J-Link models. The following table lists the minimum J-Link HW version needed to support this MCU.

  • J-Link-OB-S124
  • J-Link BASE V10
  • J-Link PLUS V10
  • J-Link ULTRA+ V4
  • J-Link PRO V4
  • J-Link WiFi V1
  • J-Trace PRO V2 Cortex-M
  • J-Trace PRO V2 Cortex

Later versions (e.g. V10 is listed and current HW is V11) will also work.

Note: Models which are not listed here do not support this MCU.

Retrieved from "https://wiki.segger.com/index.php?title=RA6M4&oldid=9412"