RZ/G1E Starter Kit

From SEGGER Wiki
Revision as of 07:57, 1 July 2016 by Erik (talk | contribs) (Created page with "The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN. In order to connect to the CPU's debug port, at first the board needs to b...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN.

In order to connect to the CPU's debug port, at first the board needs to be manually reconfigured. This can be done by switching SW7/1 (MD21) to OFF (logic 1).

wiki-board-rz1ge.png