Difference between revisions of "Raspberry Pi RP2040"
(Created page with "This article covers the Raspberry Pi RP2040 device, an arm Cortex-M0+ dualcore MCU with up to 133 MHz Clock. It is the first MCU designed and published by Raspberry Pi. The RP...") |
|||
| Line 17: | Line 17: | ||
| Pins (dedicated) || 6 SPI IOs |
| Pins (dedicated) || 6 SPI IOs |
||
|} |
|} |
||
| − | For further information please refer to the [https://www.raspberrypi.org/documentation/pico/getting-started/ |
+ | For further information please refer to the [https://www.raspberrypi.org/documentation/pico/getting-started/ Raspberry Pi Pico web page] |
== J-Link Support == |
== J-Link Support == |
||
Revision as of 15:17, 4 February 2021
This article covers the Raspberry Pi RP2040 device, an arm Cortex-M0+ dualcore MCU with up to 133 MHz Clock. It is the first MCU designed and published by Raspberry Pi. The RP2040 is present on the Raspberry Pi Pico evaluation board.
Features (selection)
| Stat | Specification |
|---|---|
| Core | Dualcore M0+ |
| RAM | 264kB SRAM |
| Internal flash | No internal flash (ext. QSPI supported) |
| Pins (multifunc) | 30 GPIOs |
| Pins (dedicated) | 6 SPI IOs |
For further information please refer to the Raspberry Pi Pico web page
J-Link Support
The Raspberry Pi RP2040 is fully supported by J-Link. Support was implemented with J-Link Software Pack V6.96.
