View source for Renesas Evaluation Kit RE01 256KB

__TOC__
This article describes specifics for the Renesas Evaluation Kit RE01 256KB.

[[File:RE01_256KB_EVK.jpg|450px]]
= QSPI Flash Programming Support =

Before continuing with this article,  please read the generic article about QSPI flash programming support on Renesas RE01 devices ([[Renesas_RE01#QSPI_support|Renesas RE01 QSPI]]). The pinout used on the ''Evaluation Kit RE01 256KB'', is given below.

====Quad-SPI Interface Pins====
The Renesas ''Evaluation Kit RE01 256KB'' uses the following port pins to interface the (Q)SPI flash.
{| class="wikitable"
|-
! Alternate function !! Pin 
|-
| QSPCLK_A           || P812
|- 
| QSSL_A             || P807
|-
| QIO0_A             || P811
|-
| QIO1_A             || P810
|}

==== Example Project ====
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas Evaluation Kit RE01 256KB. It is a simple [[RTT]] Hello World sample linked into the internal flash and the QSPI flash.
One function (_FuncInQSPI) is located in the QSPI-Flash.

===== Requirements =====
* J-Link Software V6.82 or above
* Embedded Studio: V4.52 or above
* Hardware: Renesas Evaluation Kit RE01 256KB
* Link: [[File:Renesas_RE01_256KB_EVK_QSPI_SES_Example.zip]]