Difference between revisions of "Renesas RA4E1"

From SEGGER Wiki
Jump to: navigation, search
 
Line 3: Line 3:
   
 
=Flash=
 
=Flash=
  +
==Supported Regions==
The internal flash consists of a program region (maximum size 512KB) and a data region (size 8KB).
 
  +
The following regions are supported by the J-Link:
 
  +
*Program flash (0x00000000 up to 0x00080000)
Furthermore, an optional external QSPI flash might be present (maximum size 64MB)
 
  +
*Data flash (0x08000000 to 0x08002000)
  +
*Option-setting memory (0x0100A100 to 0x0100A300)
  +
*Optional external QSPI flash (0x60000000 up to 0x64000000)
   
 
=TrustZone=
 
=TrustZone=
Line 11: Line 14:
 
Whether the RAMCode is usable depends on the "Device Lifecycle Managment" state (DLM). In the NSECSD state only the RAMless flashloader can be used. This is a technical limitation. The J-Link software is not able to decide at runtime when to use the RAMCode or RAMless flashloader. If you want to use the RAMless flashloader, you have to add "_RAMLess" to the device name, e.g. use "R7FA4E10D_RAMLess" instead of "R7FA4E10D".
 
Whether the RAMCode is usable depends on the "Device Lifecycle Managment" state (DLM). In the NSECSD state only the RAMless flashloader can be used. This is a technical limitation. The J-Link software is not able to decide at runtime when to use the RAMCode or RAMless flashloader. If you want to use the RAMless flashloader, you have to add "_RAMLess" to the device name, e.g. use "R7FA4E10D_RAMLess" instead of "R7FA4E10D".
 
Please note that a significantly lower programming speed has to be expected with the RAMless flashloader.
 
Please note that a significantly lower programming speed has to be expected with the RAMless flashloader.
 
==Supported Regions==
 
The following regions are supported by the J-Link:
 
*Program flash (0x00000000 up to 0x00080000)
 
*Data flash (0x08000000 to 0x08002000)
 
*Option-setting memory (0x0100A100 to 0x0100A300)
 
*External QSPI flash (0x60000000 up to 0x64000000)
 
   
 
=Evaluation Boards=
 
=Evaluation Boards=

Latest revision as of 14:58, 19 October 2021

The Renesas RA4E1 series are microcontrollers based on the ARM Cortex-M33 core.

Flash

Supported Regions

The following regions are supported by the J-Link:

  • Program flash (0x00000000 up to 0x00080000)
  • Data flash (0x08000000 to 0x08002000)
  • Option-setting memory (0x0100A100 to 0x0100A300)
  • Optional external QSPI flash (0x60000000 up to 0x64000000)

TrustZone

Flash programming with TrustZone enabled is supported (DLM state SSD and NSECSD). Whether the RAMCode is usable depends on the "Device Lifecycle Managment" state (DLM). In the NSECSD state only the RAMless flashloader can be used. This is a technical limitation. The J-Link software is not able to decide at runtime when to use the RAMCode or RAMless flashloader. If you want to use the RAMless flashloader, you have to add "_RAMLess" to the device name, e.g. use "R7FA4E10D_RAMLess" instead of "R7FA4E10D". Please note that a significantly lower programming speed has to be expected with the RAMless flashloader.

Evaluation Boards